Power Management Modes; Full On Mode; Standby Mode; System Standby Wakeup Events - Honeywell THOR VM1 Reference Manual

Power Management Modes

The Thor VM1 has four power modes: On, Standby, Hibernate and Off.

Full On Mode

When the Thor VM1 is attached to either vehicle power or an external power supply or is operating from the UPS battery and
the power button is pressed, the Thor VM1 is in the On mode. In this mode, the keypad, touch screen and any attached
peripherals such as a scanner function normally. The display remains on until the display, standby or hibernate timer (if
enabled) expires.
When in Full On mode, the status LED is solid green.
If the Thor VM1 is Full On, a press of the power button can be configured to put the unit in Standby. See
Options > Advanced.

Standby Mode

When the standby timer expires without a primary event occurring, the Thor VM1 transitions to standby mode. Pressing the
Power button exits Standby mode and transitions the Thor VM1 to Full On.
When in Standby Mode, the status LED:
blinks green very slowly if external power is attached.
l
is off if external power is not attached.
l

System Standby Wakeup Events

The following events transition the Thor VM1 from Standby to Full On Mode:
Pressing and releasing the Power button
l

Hibernate Mode

When the Thor VM1 enters hibernate mode, all LEDs are off. Pressing the Power button returns the Thor VM1 to Full On. By
default, Hibernate mode is not enabled.
When in Hibernate Mode, the status LED:
blinks green very slowly if external power is attached.
l
is off if external power is not attached.
l

System Hibernate Wakeup Events

The following event transition the Thor VM1 from Standby to Full On Mode:
Pressing and releasing the Power button.
l

Off Mode

The Thor VM1 turns off if the user presses the power button when the Thor VM1 is On. The Thor VM1 is also off when it is not
connected to a power source and the UPS battery is depleted. However, an internal Real Time Clock (RTC) powered by an
internal battery maintains the date and time while the Thor VM1 is off.
Control Panel > Power
2-6