Sounds - Honeywell Thor VM3 Manual

Current Level
Current levels of LCD brightness and ambient light are displayed as a percentage. Ambient light level is detected by
the light sensor, located near the top right of the display.
Defroster Control
Enable the touch screen defroster, if installed, and set the trip point. Settings are ignored if the defroster is not
installed.
If a defroster is installed, the defroster can be switched between the Enabled and Disabled states using the check
box. The default is Disabled (unchecked).
Specify the Defroster trip point. The default trip point is 40ºC/104ºF.

Sounds

(Start) > All Apps > Windows System > Control Panel > Sounds (Large or Small Icon View)
Use the slider bar to adjust the volume level as desired.
Alternatively:
• Tap the Volume icon, if present, in the taskbar and move the slider until the volume level is as desired.
• Use the integrated keypad - press the Blue key then P1 to adjust volume up or Blue then P2 to adjust volume down.
• By default the side tone is muted. If needed, the user should enable the side tone. If this causes interfering noise, the
side tone should be disabled. The VM3 audio is designed to be used with or without the side tone. This is acceptable
permissible performance for the Thor VM3.
5 - 38