Adjusting The Document Resolution - Dell H815DW User Manual

2 Place the document facing down on the document glass and align it with the registration guide on the top left
corner of the glass.
3 Adjust the document resolution. (For details, see "Adjusting the Document Resolution.")
4 Close the document cover.
NOTE:
Ensure that no document is in the DADF. If any document is detected in the DADF, it takes priority over the
document on the document glass.
NOTE:
If you are faxing a page from a book or magazine, lift the cover until its hinges are caught by the stopper and then
close the cover. If the book or magazine is thicker than 30 mm, start faxing with the cover open.

Adjusting the Document Resolution

You can improve the quality of the fax document by adjusting the resolution, especially for documents with low
image quality or documents containing photographic images.
1 Press the (Home) button.
 Fax.
2 Tap
3 Tap
.
4 Tap Resolution.
5 Tap the desired setting.
Standard*
Fine
Super Fine
Photo
* Denotes the factory default setting.
NOTE:
Faxes scanned in the Super Fine resolution transmit at the highest resolution supported by the receiving device.
Used for documents with normal sized characters.
Used for documents containing small characters or thin lines or documents printed using a
dot-matrix printer.
Used for documents containing extremely fine detail. The super fine mode is enabled only if
the remote machine also supports the Super Fine resolution. See the note below.
Used for documents containing photographic images.
355
Faxing