Dell H815DW User Manual page 52

10 Insert tray1 into the printer, and push until it stops.
11 Insert the MPF into the printer, push until it stops, and close the MPF cover.
12 Re-connect all cables into the rear of the printer, and turn on the printer.
NOTE:
The printer will automatically detect the attached tray but will not detect the paper type.
13 Print the system settings report to confirm that the optional 550-sheet feeder is installed correctly.
For details about how to print a system settings report, see "Report / List."
14 Confirm Tray2 (550 Sheet Feeder) is listed in the system settings report under Printer Options.
If the feeder is not listed, turn off the printer, unplug the power cable, and re-install the optional 550-sheet feeder.
15 After loading paper in the optional 550-sheet feeder, specify the paper type from the printer touch panel.
Press the (Information) button.
a
Tap the Tools tab, and then tap Tray Management.
b
Tap Tray Settings.
c
Tap Tray2.
d
Tap Type.
e
Tap until the desired paper type appears, and then tap the desired paper type.
f
Tap OK.
g
16 If you installed the optional 550-sheet feeder after installing the printer driver, update your driver by following the
instructions for each operating system. If the printer is on a network, update the driver for each client.
52
Installing Optional Accessory