Dell H815DW User Manual page 433

Message
Change the server settings and
confirm the server connection.
Check the authentication settings.
Invalid search characters or LDAP
User Mapping incorrectly configured
for Configuration Web Tool.
Network connection is not ready. Try
again later.
No attribute or invalid name.
Confirm address info. on server.
No Entries.
Search Directory Root incorrectly
configured for Configuration Web
Tool.
Too many search results. Only a
maximum of 50 search scan be
displayed. Please refine your search if
needed.
Authentication server access Error
016-530
Restart the printer.
Cause
The LDAP or Kerberos version on the server
is not compatible with the printer.
The server is down.
The printer cannot search for destinations
within the specified time.
The login name and password for access to
an authentication server are incorrect.
The LDAP search filter fails to work properly
as special characters are used in your search
condition or on the LDAP User Mapping
page on the Dell Printer Configuration
Web Tool.
You have started searching for destinations
before the IP address is set for the printer.
The address information on the server
contain incorrect data or are insufficient to
get your search request.
The printer cannot find any destinations
that meet your search condition.
The directories that do not exist in the
LDAP server are specified or an invalid DN
syntax is specified.
The number of search results has exceeded
the limits (50 search results) the printer can
display.
Some other error occurs regarding the LDAP
server address book.
Action
Consult your network administrator.
Check that the server is functioning
normally.
Increase the time setting for Search Time-
Out on the Dell Printer Configuration Web
Tool. (See "Authentication System" and
"LDAP Server.")
Check that the printer and the server are
properly connected with an Ethernet cable.
If there are not any problems with the
connection and the error persists, the server
settings may have been changed. Consult
your network administrator.
Make sure that the correct login name and
password are specified in Login Name and
Password on the Dell Printer Configuration
Web Tool. (See "Kerberos Server" and
"LDAP Server.")
Remove special characters, and then search
again. (See "LDAP User Mapping.")
Wait for a while, and then search again.
Check the address information registered on
the server or consult your network
administrator.
Tap to return to the Search Network
OK
Address Book screen, and then specify a
new condition to search again.
Make sure that valid values are specified in
Search Directory Root on the Dell Printer
Configuration Web Tool. (See "LDAP
Server.") Specify the origin of the search
with the correct DN syntax, as shown in the
following example:
dc=w2008ad,dc=addressbook,dc=net
Tap Close to display the search results. If
you cannot find your desired destination on
the result list, specify a new condition to
search again.
Turn off the printer, and turn it on again. If
the error persists, consult your network
administrator.
Understanding Printer Messages
433