Dell H815DW User Manual page 164

Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM Memory
and restart printer.
Restart Printer
Security
The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP
Authentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter (IPv4), and SMTP Domain Filtering.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Values:
Administrator Password
Re-enter Administrator Password
Access denial by the authentication
failure of the Administrator
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Values:
Authentication Type Authentication System
Settings
Optional Information Server Response Time-
Out
Search Time-Out
164
Dell™ Printer Configuration Web Tool
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Click Start to reboot the printer.
Admin Settings
Sets the password using up to 128 alphanumeric characters.
Confirms the set password.
Sets how many times the failure in administrator authentication is allowed in total.
Sets the number from 5 to 255. If you set 0, this mode is disabled.
Select the authentication system from the list.
Sets the amount of time the printer should wait for response from the
server. Sets the time period from 1 to 75 seconds.
Sets the amount of time the printer should wait for searching for the server.
Sets the time period from 5 to 120 seconds.
from Panel Lock in Printer Settings.