Dell H815DW User Manual page 75

Auto SSID Setup
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Network.
4 Tap Wi-Fi.
5 Tap Wi-Fi Setup Wizard.
The printer automatically searches the access points on wireless network.
6 Tap until the desired access point appears, and then select the access point.
If the desired access point does not appear, go to "Manual SSID Setup."
NOTE:
Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
7 Tap Next.
8 Enter the WEP key or passphrase.
When the encryption type of the selected access point is WEP in step 6:
Tap the WEP Key text box, and then enter the WEP key.
a
Tap OK.
b
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:
Tap the Passphrase text box, and then enter the passphrase.
a
Tap OK.
b
9 The Restart System screen appears.
10 Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
Manual SSID Setup
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Network.
4 Tap Wi-Fi.
5 Tap Wi-Fi Setup Wizard.
6 Tap the Manual SSID Setup check box, and then tap Next.
7 Enter the SSID, and then tap Next.
8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then tap
Next.
If you select Infrastructure, proceed to step 9.
If you select Ad-hoc, proceed to step 10.
Connecting and Setting Up Your Printer
75