Adjusting The Document Resolution; Sending A Fax Automatically - Dell 1600n User Manual

Adjusting the Document Resolution

The default document settings produce good results when setting typical text based
documents.
However, if you send documents that are of a poor quality, or contain photographs, you can
adjust the resolution to produce a higher quality fax.
1
2
3
The document types recommended for the resolution settings are described in the table
below.
Mode
Standard
Fine
Super Fine
Photo
Color

Sending a Fax Automatically

1
12 0
Faxing
Press <Resolution>.
By pressing <Resolution> or the scroll button ( or ), you can choose from
Standard, Fine, Super Fine, Photo and Color.
When the mode you want to use displays, press <Select> to save the selection.
NOTE: For the memory transmission, the Super Fine mode is not available. The resolution
setting is automatically changed to Fine.
NOTE: When your machine is set to Super Fine resolution and the remote fax machine does not
support the Super Fine resolution, the machine transmits using the highest resolution mode
supported by the remote fax machine.
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the scanner glass.
For details about loading a document, see page 118.
Recommended for:
Documents with normal sized characters.
Documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Documents containing extremely fine detail. The super fine
mode is enabled only if the remote machine also supports the
Super Fine resolution. See the notes below.
Documents containing shades of gray or photographs.
Documents with colors. Sending a color fax is enabled only if
the remote machine supports color fax reception and you send
the fax manually. In this mode, the memory transmission is
now available.