Dell H815DW User Manual page 93

4 Select the printer you want to install from the printer list, and then click Next. If the target printer is not displayed
on the list, click the
manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select the I am setting up this printer on a server check
box.
NOTE:
When using AutoIP,
address.
NOTE:
If Windows Security Alert is displayed in this step, select Unblock or Allow access, and then continue the
procedure.
5 Specify the printer settings, and then click Next.
Enter the printer name.
a
If you want to set the printer as the default printer, select the Set this printer as default check box.
b
If you want to install the PostScript 3 Compatible printer driver, select the PS Driver check box.
c
If you want to install the Fax Driver, select the Fax Driver check box.
If you want other users on the network to access the printer, select Share this printer with other computers on
d
the network, and then enter a share name that users can identify.
6 Select the software and documentation you want to install, and then click Install. If you want to change the
installation destination, click Change Destination Folder and specify a new location.
7 Click Finish to exit the wizard when the Ready to Print! screen appears.
If you want to verify installation, click Print Test Page before clicking Finish.
For installing XML Paper Specification (XPS) printer driver
NOTE:
XML Paper Specification (XPS) driver is supported on Windows Vista
®
Windows Vista or Windows Vista
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS-V3_H815dw_S2815dn.zip (where D is the drive letter of the
optical drive)
2 Click Start Control Panel Hardware and Sound Printers.
3 Click Add a printer.
4 Click Add a network, wireless or Bluetooth printer.
5 Select printer and click Next, or click The printer that I want isn't listed.
6 Select Add a printer using a TCP/IP address or host name, and then click Next.
7 Select TCP/IP Device from Device type, and enter the IP address for Hostname or IP address, and then click
Next.
If the User Account Control dialog box appears, click Continue.
NOTE:
If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
8 Click Have Disk to display the Install From Disk dialog box.
9 Click Browse, and then select the inf file in the folder extracted in step 1.
10 Click OK.
11 Select your printer name and click Next.
(Refresh) button to refresh the list or click add printer manually to add a printer to the list
is displayed in the installer. Before you can continue, you must enter a valid IP
0.0.0.0
®
64-bit Edition
®
or later.
Installing Printer Drivers on Windows
®
93
Computers