Using An Answering Machine - Dell H815DW User Manual

8 Enter a four-digit password, and then tap OK.
When a fax is received in the secure receiving mode, your printer stores it into memory and Secure Fax
Receive is enabled on the Print screen to let you know that there is a fax stored.
To print received documents:
1 Press the (Home) button.
2 Tap  Print.
3 Swipe the screen until Secure Fax Receive appears, and then tap Secure Fax Receive.
4 Enter a four-digit password, and then tap OK.
The faxes stored in memory are printed.
To turn the secure receiving mode off:
1 Follow the same steps from 1 to 6 in "To turn the secure receiving mode on:" and tap Secure Receive Set.
2 Tap Disable.

Using an Answering Machine

To the
wall jack
You can connect a telephone answering device (TAD) directly to the rear of your printer as shown above.
• Set your printer to the Ans Machine/Fax and set Auto Receive Ans/Fax to specify the time for the
TAD.
• When the TAD picks up the call, the printer monitors and takes the line if fax tones are received and then starts
receiving the fax.
• If the answering device is off, the printer automatically goes into the Fax after the ring tone sounds for a
predefined time.
• If you answer the call and hear fax tones, the printer will answer the fax call if you
Set On Hook to On (you can hear voice or fax tones from the remote machine), and then tap Receive and hang
up the receiver.
OR
Press the two-digit remote receive code and hang up the receiver.
Printer Line Telephone
Answering Device
Phone
Faxing
369