Dell H815DW User Manual page 210

Power Saver Timer
Purpose:
To specify the time for transition to power saver mode.
Values:
Sleep 7 minutes
Available Range: 1–60 minutes
Deep Sleep 8 minutes
Available Range: 1–60 minutes
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a medium value if you want a balance between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing the
(Power Saver) button on the operator panel.
Date & Time
Purpose:
To specify the date and time formats.
Values:
Time Zone
Date
Format
Time
Format
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
*
Millimeters(mm)
Inches(")
NOTE:
The default for
mm/inch
210
Understanding the Printer Menus
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
*
Specifies the time taken by the printer to enter Deep Sleep mode after it
has entered Sleep mode.
Sets the time zone.
Sets the date depending on the
Sets the date format.
Sets the time.
12 Hour Sets the time in 12-hour format.
24 Hour Sets the time in 24-hour format.
Selects millimeter as the default measurement unit.
Selects inch as the default measurement unit.
varies depending on other settings, such as
settings.
Format
and
Country Document Size
.