Setting Your Country - Dell H815DW User Manual

5 Follow the instructions displayed on the screen.
Available settings are:
• Country
• Line Type
• Tone/Pulse
• Receive Mode
• DRPD Pattern
(This setting is available only when a distinctive ring service is installed on your telephone line by your
telephone company.)
• Fax Header Name
• Fax Number
NOTE:
To make initial settings from the printer operator panel, see "Setting Your Country."

Setting Your Country

1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Fax Settings.
4 Tap Fax Line Settings.
5 Tap Country.
6 Select the country where the printer is used, and then tap OK.
The printer must be rebooted after you set the country settings. When a screen prompting you to reboot the
printer, tap Yes. After the reboot, the Home screen is displayed on the touch panel.
NOTE:
When you configure the country setting, the information, which is registered to the printer, is initialized.
Setting the Printer ID
In most countries, you are required by law to indicate your fax number on any fax you send. The printer ID,
containing your telephone number and name or company name, will be printed at the top of each page sent from
your printer.
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Fax Settings.
4 Tap Fax Line Settings.
5 Tap Fax Number.
6 Enter your fax number using the number pad, and then tap OK.
NOTE:
If you make a mistake while entering numbers, press the
7 Tap Fax Header Name.
8 Enter your name or company name using the keyboard, and then tap OK.
For details on how to use the keyboard to enter alphanumeric characters, see "Using the Keyboard Displayed on the
Touch Panel."
346
Faxing
button to delete the last digit.