Dell H815DW User Manual page 137

Speed Dial
Address Book
Server Address
Fax Activity
Fax Pending
*1
Stored Documents
*1
This item is available only when RAM Disk is enabled.
Printer Settings
The Printer Settings tab includes System Settings, Network Settings, USB Settings, PCL Settings, PS Settings,
PDF Settings, Secure Settings, Copy Defaults, Copy Settings, Fax Defaults, Fax Settings, Scan Defaults, Direct
Print Defaults/USB Direct Print Defaults
*1
Direct Print on the Dell Cloud Multifunction Printer | H815dw; USB Direct Print on the Dell Smart Multifunction Printer | S2815dn
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
Power Saver Time - Deep Sleep
mm / inch
Screen Brightness
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Copy Completed Tone
Job Completed Tone
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Alert Tone
Auto Clear Alert Tone
Click Start to print the Speed Dial report.
Click Start to print the Address Book list.
Click Start to print the Server Address list.
Click Start to print the Fax Activity report.
Click Start to print the Fax Pending list.
Click Start to print the Stored Documents list.
*1
, and MIFARE Customized Card pages.
Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
Sets the measurement unit to be used on the touch panel as either mm or
inches.
Sets the brightness level of the touch panel screen.
Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Sets the volume of the tone that is emitted when a copy job is complete, or
disables the tone.
Sets the volume of the tone that is emitted when a job other than a copy job
is complete, or disables the tone.
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.
Dell™ Printer Configuration Web Tool
137