Loading Print Media In Tray1 And The Optional 550-Sheet Feeder - Dell H815DW User Manual

Loading Print Media in Tray1 and the Optional 550-Sheet Feeder

This section describes how to load letterhead. For details about loading print media other than letterhead, see
"Loading Paper."
NOTE:
To avoid paper jams, do not remove the tray while printing is in progress.
NOTE:
Use only laser print media. Do not use ink jet paper in the printer.
Loading Letterhead (Pre-Printed and Pre-Punched Paper)
The pre-printed paper such as letterhead and pre-punched paper must be inserted bottom edge first with the print
side facing down as shown below.
NOTE:
To enable printing with letterhead paper, set Paper Type to Letterhead and Letterhead Duplex Mode to Enable from the
printer driver. Make sure to set
side of letterhead, pre-printed, or pre-punched paper.
Print media source
Tray1 and optional 550-sheet
feeder
MPF
270
Loading Print Media
to
Paper Type Letterhead
Print side
Face down
Face down
from the operator panel even when you print on a single
Letterhead enters the printer
last
Letterhead enters the printer
last
Page orientation