Dell H815DW User Manual page 349

Option
DRPD Pattern
Incoming Receive Mode
Defaults
Ring Tone Volume
Auto Receive
Setup
Junk Fax Setup
Description
Before using the Distinctive Ring Pattern Detection (DRPD)
option, distinctive ring service must be installed on your telephone
line by the telephone company. After the telephone company has
provided a separate number for faxing with a distinctive ring
pattern, configure the fax setup to monitor for that specific ring
pattern.
You can select the default fax receiving mode.
• Telephone (manual receive mode): Automatic fax reception is
turned off. You can receive a fax by picking up the handset of the
external telephone and then pressing the remote receive code, or
by tapping
tapping
see "Receiving a Fax Manually in the Telephone Mode."
• Fax: (automatic receive mode)
• Telephone / Fax: When the printer receives an incoming fax, the
external telephone rings for the time specified in
Fax/Tel
an incoming call is not a fax, the printer beeps from the internal
speaker indicating that the call is a telephone call.
• Ans Machine/Fax: The printer can share a telephone line with an
answering machine. In this mode, the printer will monitor the fax
signal and pick up the line if there are fax tones. If the phone
communication is using serial transmission in your country (such
as Germany, Sweden, Denmark, Austria, Belgium, Italy, France
and Switzerland), this mode is not supported.
• DRPD: Before using the Distinctive Ring Pattern Detection
(DRPD) option, distinctive ring service must be installed on your
telephone line by the telephone company. After the telephone
company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for
that specific ring pattern.
Sets the volume of the ring tone, which indicates that an incoming
call is a telephone call through the internal speaker when
Receive Mode
Auto Receive Fax Sets the interval at which the printer goes into the fax receive
mode after receiving an incoming call. The interval can be
specified within the range of 0 to 255 seconds. The default is 0
second.
Auto Receive Sets the interval at which the printer goes into the fax receive
Tel/Fax mode after the external telephone receives an incoming call. The
interval can be specified within the range of 0 to 255 seconds. The
default is 6 seconds.
Auto Receive Sets the interval at which the printer goes into the fax receive
Ans/Fax mode after the external answering machine receives an incoming
call. The interval can be specified within the range of 0 to 255
seconds. The default is 21 seconds.
You can reject faxes sent from unwanted stations. The system only
accepts faxes from the remote stations registered in the speed dial.
This feature is useful for blocking any unwanted faxes.
Tap
Off
Tap to turn the feature on.
On
in
Manual Receive
. For details about
Receive
, and then the printer automatically receives a fax. If
is set to Telephone / Fax
to turn the feature off. Anybody can send you a fax.
and then
On Hook
,
Manual Receive
Auto Rec
.
349
Faxing