Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original:
1 Swipe the screen until Sharpness appears, and then tap Sharpness.
2 Tap the desired setting.
Sharpen
Normal*
Soften
* Denotes the factory default setting.
Reduce / Enlarge
To reduce or enlarge the size of a copied image from 25 to 400 percent when you copy original documents from the
document glass or DADF:
NOTE:
When you make a reduced copy, black lines may appear at the bottom of your copy.
1 Swipe the screen until Reduce/Enlarge appears, and then tap Reduce/Enlarge.
2 Tap the desired setting, and then tap OK.
(Inch series)
100%*
50%
64% (LedgerLetter)
78% (LegalLetter)
129% (StatementLetter)
154% (StatementLegal)
200%
(mm series)
100%*
50%
70% (A4A5)
81% (B5A5)
122% (A5B5)
141% (A5A4)
200%
* Denotes the factory default setting.
NOTE:
You can also specify the value in increments of 1 percent from 25 to 400 by tapping – or +.
310
Copying
Makes the copy image sharper than the original.
The clarity of the image is the same as the original.
Makes the copy image softer than the original.