Dell H815DW User Manual page 116

3 Touch Panel
• Specifies the settings by directly tapping the screen.
• Displays various settings, instructions, and error messages.
4 Ready / Error LED
• Shows a green light when the printer is ready and a blinking green light when data is being received.
• Shows an amber light when an error occurs and a blinking amber light when an unrecoverable print error
occurs.
5 Number Pad
• Enters numbers and characters.
6 (Redial / Pause) button
• Calls up the last called number.
• Inserts a pause into a telephone number.
7 (Copy) button
• Starts copying the document. Effective only from the Home screen while you are logged in to the printer.
8 (Power Saver) button
• Enters or exits the Power Saver mode. When the printer is not used for a while, it enters the Power Saver mode
to reduce power consumption. When the Power Saver mode is active, the
9 (NFC) reader
• Starts communication between the printer and an NFC card or a mobile device with the NFC function when
the card or the device is tapped to the reader.
10 (Speed Dial 1 / Speed Dial 2) button
/
• Starts faxing the document to the number registered as "001" and "002" respectively of the FAX Speed Dial.
Effective only when the Home screen is displayed.
11 (Delete) button
• Deletes numbers and characters.
12 (Job Status) button
Moves to the Job Status screen. From this screen, you can check or cancel active jobs.
•
13 (Information) Wi-Fi|WPS button
• Moves to the Information screen. You can access various information and settings menu including Wi-Fi and
Wi-Fi Direct features, check the name of the connected device via Wi-Fi Direct, check consumable levels and
network status, and print various types of reports and lists.
14 (Information) button
• Moves to the Information screen. You can access various information and settings menu, check consumable
levels and network status, and print various types of reports and lists.
NOTE:
Moving to a different menu or returning to a previous screen cancels the current entry or setting. Be sure to select
save the current entry or setting.
116
Operator Panel
(Power Saver) button blinks.
OK
to