Dell H815DW User Manual page 351

Option
Discard Size
Transmission Auto Redial Setup Redial Attempts
Defaults
Tone/Pulse
Prefix Dial
Fax Cover Page
Fax Header
ECM
Modem Speed
Display Manual
Fax Recipients
Fax Reports Fax Activity
Fax Transmit
Fax Broadcast
Description
When receiving a document as long as or longer than the paper
installed in your printer, you can set the printer to discard any
excess at the bottom of the page. If the received page is outside
the margin you set, it will print on two sheets of paper at the
actual size. When the document is within the margin and
Discard Size
reduces the document to fit it onto the appropriate sized paper
and discard does not occur. If
than Auto Reduction
discarded.
You can specify the number of redial attempts to make when the
destination fax number is busy, within the range of 0 to 13. If you
enter 0, the printer will not redial.
Interval of Redial Your printer can automatically redial a remote fax machine if it
was busy. Intervals from 1–15 minutes can be entered.
Resend Delay You can specify the interval between transmission attempts within
the range of 3 to 255 seconds. The default is 8 seconds.
You can select the dialing type.
• Tone
• Pulse(10PPS)
• Pulse(20PPS)
You can specify whether or not to set a prefix dial number. When
you set
Prefix Dial
Dial Number
useful for accessing the Private Automatic Branch Exchange
(PBX). You can set a prefix dial number of up to five digits.
You can set whether to attach a cover page to faxes when sending
faxes.
Prints the sender's information on the header of faxes.
Tap
Off
Tap to turn this feature on.
On
Note that if United States is selected for the setting of Country,
this option does not appear on the menu. The setting is fixed to
On and cannot be changed.
For information on the country setting, see "Setting Your
Country."
You can set whether to enable or disable the ECM (Error
Correction Mode).
You can set the modem speed.
You can set whether to display the fax number of the recipient on
the Sending Fax screen when manually sending a fax.
You can set whether to automatically print a fax activity report
after every 50 incoming and outgoing fax communications.
You can set whether to print a transmission result after a fax
transmission.
You can set whether to print a transmission result after a fax
transmission to multiple locations.
is set to
Auto Reduction
Discard Size
, the data within the margin will be
to , the number set in
On
dials before any auto dial number is started. It is
to turn this feature off.
, the printer
is set to other
Prefix
351
Faxing