Adjusting The Document Resolution; Sending A Fax Automatically - Dell 1600n Multifunction Mono Laser Printer User Manual

Adjusting the Document Resolution

Use the Document Resolution setting to improve the output quality of the original or if scanning
photographic materials.
1. Press <Resolution>.
2. By pressing <Resolution> or the scroll button ( or
Fine, Photo and Color.
3. When the mode you want to use displays, press <Select> to save the selection.
The document types recommended for the resolution settings are described in the table below.
Mode Recommended for:
Standard Documents with normal sized characters.
Fine Documents containing small characters or thin lines or documents printed using a dot-
matrix printer.
Super Documents containing extremely fine detail. The super fine mode is enabled only if the
Fine remote printer also supports the Super Fine resolution. See the notes below.
Photo Documents containing shades of gray or photographs.
Color Documents with colors. Sending a color fax is enabled only if the remote printer supports
color fax reception and you send the fax manually. In this mode, the memory
transmission is not available.
When you select "Color", and then "USE ON HOOK DIAL FOR COLOR FAX" displays for 5
seconds, press <On Hook Dial>.
NOTE: Faxes scanned in Super Fine resolution will transmit at the highest resolution supported by the
receiving device.

Sending a Fax Automatically

1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the scanner glass.
For details about loading a document, see
2. Adjust the document resolution to suit your fax needs (see
If you need to change the contrast, see
3. Enter the remote fax phone number using the number keypad.
), you can choose from Standard, Fine, Super
page 120.
page
page 118.
122).