Select Tray - Dell H815DW User Manual

Select Tray

To select the tray:
1 Tap Select Tray.
2 Tap the desired setting, and then tap OK.
MPF
Tray1*
Tray2
* Denotes the factory default setting.
NOTE: Tray2
is only available when the optional 550-sheet feeder is installed.
NOTE:
When
Any
menu. For details, see "Select Tray."
2 Sided Copying
To make duplex copies with the specified binding position:
1 Swipe the screen until 2 Sided Copying appears, and then tap 2 Sided Copying.
2 Tap the desired setting, and then tap OK.
1  1 Sided*
Select 1 sided or 2 sided and specify binding position for the 2 sided copy.
1  2 Sided
2  1 Sided
2  2 Sided
Long Edge Binding
Short Edge Binding
* Denotes the factory default setting.
When you are using the document glass and it is set to 1  2 Sided or 2  2 Sided, the display prompts you
for another page after tapping Copy.
If you want to place a new document, replace the document with a new document, and then tap Continue.
a
If you finish copying, tap Print Now.
b
NOTE:
When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set
to the same size as the document.
Size
The paper is fed from the multipurpose feeder.
The paper is fed from tray1.
The paper is fed from the optional 550-sheet feeder.
is displayed as the paper size and type in the MPF, you can select the paper size and type from this
Original
309
Copying