Setting The Time And Date - Dell H815DW User Manual

Setting the Time and Date

NOTE:
It may be necessary to reset the correct time and date if loss of power to the printer occurs.
To set the time and date:
1 Press the
(Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap System Settings.
4 Tap General.
5 Tap Date & Time.
6 Tap Time Zone.
7 Tap until the desired geographic region appears, and then select that region.
8 Tap
until the desired time zone appears, and then select that time zone.
9 Tap OK.
10 Tap Date.
11 Tap – or + or enter the date using the number pad, and then tap OK.
12 Tap Time.
13 Enter the time using the number pad.
14 Tap OK.
NOTE:
The printer beeps and does not allow you to proceed to the next step if a wrong number is entered.
Changing the Clock Mode
You can set the current time using either the 12-hour or the 24-hour format.
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap System Settings.
4 Tap General.
5 Tap Date & Time.
6 Tap Time.
7 Tap 12 Hour or 24 Hour, and then tap OK.
Setting Sounds
Speaker Volume
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Fax Settings.
4 Tap Fax Line Settings.
5 Tap until Line Monitor appears, and then tap Line Monitor.
6 Select the desired volume, and then tap OK.
7 Turn off the printer, and turn it on again to apply the settings.
347
Faxing