Setting The Administrator's E-Mail Address - Dell H815DW User Manual

In the POP3 Server Address text box, enter the POP3 server address in IP address format of "aaa.bbb.ccc.ddd"
g
or as a DNS host name using up to 63 characters.
In the POP3 Port Number text box, enter the POP3 server port number. This must be between 1 and 65535.
h
In the POP User Name text box, set the POP3 account user name. Up to 63 alphanumeric characters, periods,
i
hyphens, underscores, and at symbols (@) can be used. If specifying more than one address, separate them
*1
using commas.
In the POP User Password text box, enter the POP3 account password using up to 31 alphanumeric
j
*1
characters.
In the Re-enter POP User Password text box, enter the POP user password again to confirm it.
k
In the Reply Address text box, enter the reply e-mail address sent with each E-Mail Alert.
l
*1
Required to enter if you select POP before SMTP (Plain) or POP before SMTP (APOP) for E-Mail
Send Authentication.
4 Click Apply New Settings.
If SMTP authentication is selected for E-Mail Send Authentication and if SSL/TLS encryption is used to
communicate with the SMTP sever, the SSL/TLS type must be set in SMTP-SSL/TLS Communication of
SSL/TLS under the Security tab. Proceed to step 5.
If SSL/TLS is not used or if "Invalid", "POP before SMTP (Plain)", or "POP before SMTP (APOP)" is selected for
E-Mail Send Authentication, the mail server settings are complete.
NOTE:
To send an e-mail through Gmail, set the SSL/TLS type should be set to STARTTLS in SMTP-SSL/TLS
Communication of SSL/TLS under the Security tab.
5 Click Security tab.
6 Select SSL/TLS.
7 Select a SSL/TLS type from the SMTP-SSL/TLS Communication list.
NOTE:
To use a Gmail account, select STARTTLS.
8 Click Apply New Settings.

Setting the Administrator's E-mail Address

To make the printer to set an administrator's e-mail address, follow the steps below:
1 Launch the Dell Printer Configuration Web Tool.
Open the web browser.
a
Enter the IP address of your printer in the web browser.
b
See "Dell™ Printer Configuration Web Tool."
2 Click Print Server Settings.
3 Click Basic Information.
4 Set administrator's e-mail address in the Administrator E-Mail Address text box. Up to 63 alphanumeric
characters, periods, hyphens, underscores, and at symbols (@) can be used.
5 Click Apply New Settings.
340
Scanning
*1
*1
*1