Table of Contents
Advertisement
4
10. Disconnect the front passenger's airbag 4P
connector (A) f r o m the SRS main harness 4P
connector (B).
11. Disconnect both seat belt tensioner 2P connectors
(A) f r o m the side w i r e harness 2P connectors (B).
12. Disconnect the special tool f r o m the cable reel 4P
connector.
13. Disconnect SRS unit connector A (18P) f r o m the
SRS unit.
14. Check resistance between the No. 7 and the No. 16
terminals and between the No. 2 and No. 11
terminals of SRS unit connector A (18P). There
should be 1 M 0, or more.
S R S U N I T C O N N E C T O R A ( 1 8 P )
11
12 13 14 15 16 17
W i r e s i d e o f f e m a l e
t e r m i n a l s
Is the resistance
as
specified?
Y E S - F a u l t y SRS unit; replace the SRS unit (see
page 23-296). •
NO —Short in the SRS main harness or cable reel;
replace the SRS main harness or cable reel (see
page 23-292). •
23-177
Advertisement
Table of Contents
Troubleshooting
