Honda 2002 Accord Manual page 1567

4£
6. Reconnect the battery negative cable.
7. Erase the DTC memory.
8. Read the DTC.
Is DTC 2-5 indicated?
Y E S - G o t o step 9.
NO—Short to ground in the passenger's airbag
inflator; replace the passenger's airbag (see page
23-280). •
9. Disconnect the battery negative cable, and wait for
3 minutes.
10. Disconnect the driver's airbag 4P connector (A)
from the cable reel 4P connector (B), and
disconnect the special tool from the S R S main
harness 4P connector.
11. Disconnect both seat belt tensioner 2P connectors
(A) from the side wire harness 2P connectors (B).
12. Disconnect S R S unit connector A (18P) from the
S R S unit.
13. Check resistance between the No. 6 terminal of
S R S unit connector A (18P) and body ground,
between the No. 15 terminal and body ground,
between the No. 5 terminal and body ground, and
between No. 14 terminal and body ground. There
should be 1 M £ 2 or more.
S R S U N I T C O N N E C T O R A ( 1 8 P )
W i r e s i d e o f f e m a l e t e r m i n a l s
Is the resistance as specified?
Y E S - F a u l t y S R S unit; replace the S R S unit (see
page 23-296).•
NO —Short to ground in the S R S main harness;
replace the S R S main harness. •
23-187