Side Sill Outer Panel
Removal
Mass production body welding positions and numbers (Outer panel and side sill reinforcement)
NOTE:
Welding symbols
●
: 2-Plate spot welding;
L=Welding length unit: mm (in)
( ): The number of welds
●
The figure shows the size of side sill outer panel repair part.
●
(4)
(11)
( ( 11)
With outer panel removed
(1)
(4)
: 3-Plate spot welding;
Top end positions of the side
sill outer panel repair part
FRONT PILLAR OUTER
SEPARATOR (Adhesive type)
(13)
(38)
FRONT PILLAR LOWER STIFFENER
(3)
SIDE SILL
REINFORCEMENT
: 4-Plate spot welding;
(10)
CENTER PILLAR OUTER SEPARATOR A
CENTER PILLAR OUTER SEPARATOR B
(Adhesive type)
(1)
(6)
: MAG plug welding;
Rear edge position of the side
sill outer panel repair part
(1)
(12)
(11)
(8)
CENTER PILLAR STIFFENER
: MAG welding
(cont'd)
3-23