Roof Molding Replacement - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Exterior Trim

Roof Molding Replacement

• Take care not to scratch the body.

• The steel core in the roof molding cannot be restored to it original shape once it is bent. Replace the roof molding

when the steel core is bent.

1. Remove the roof rail and center bracket (see page 20-145).

2. Using a flat-tip screwdriver wrapped with protective tape and a shop towel on the body, detach the clips by prying

up the roof moldings (A).

Fastener Locations

3. Install the molding in the reverse order of removal, and note these items:

• Replace any damaged clips.

• Make sure the roof moldings (A) are installed on the clips (B) securely.

Table of Contents