Transmission Control - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

22A-46

TRANSMISSION CONTROL

REMOVAL AND INSTALLATION
Pre-removal Operation
Strut Tower Bar Removal and Installation (Refer
D
to GROUP 42.)
Air Cleaner Removal (Refer to GROUP 15.)
D
Battery and Battery Tray Removal
D
Air Pipe C, Air By-pass Hose, Air Hose D, Air Hose
D
E, and Air Hose A Removal (Refer to GROUP 15
- Intercooler.)
6
8
9
7
6
Shift cable and select cable
assembly removal steps
1. Shift knob
D Front floor console
(Refer to GROUP 52A)
2. Snap pin
3. Select cable connection
(Shift lever side)
4. Clip
5. Shift cable connection
(Shift lever side)
6. Snap pin
AA" "AA 7. Clip
AA" "AA 8. Select cable connection
(Transmission side)
AA" "AA 9. Shift cable connection
(Transmission side)
"AA 10. Shift cable and Select cable assem-
bly
MANUAL TRANSMISSION - Transmission Control
10
Caution: SRS
Be careful not to subject the SRS-ECU to any
shocks during removal and installation of the
shift cable and select cable assembly.
12 2 N·m
±
3
2
5
11
Shift lever assembly removal steps
1. Shift knob
D Front floor console
(Refer to GROUP 52A)
2. Snap pin
3. Select cable connection
(Shift lever side)
4. Clip
5. Shift cable connection
(Shift lever side)
11. Shift lever assembly
1
4
12 ± 2 N·m