Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 990

MANUAL TRANSMISSION OVERHAUL -
MD998801
3rd
speed
Identification
side
groove
Installation
direction
Synchronizer sleeve protrusion section
Synchronizer
hub deep
groove section
Synchronizer spring
MD998801
Caution
(1) Press in so that the synchronizer ring does not bite
MD998812
in.
MD998813
(2) After assembling, confirm that the 3rd speed gear
rotates smoothly.
MD998825
"FA SYNCHRONIZER SLEEVE INSTALLATION
4th
speed
(1) Install the synchronizer sleeve onto the input shaft at
side
the direction shown in the illustration.
(2) Align the synchronizer hub deep grooves with the sleeve
protrusions and install.
"GA SYNCHRONIZER SPRING INSTALLATION
Install the synchronizer spring onto the input shaft.
"HA 4TH SPEED GEAR SLEEVE INSTALLATION
MD998812
Using the special tool, install the 4th speed gear sleeve onto
MD998813 the input shaft.
MD998825
Input Shaft
22B-25