Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 606

Strong
vinyl bag
Air Bag Module and Seat Belt Pre-tensioner
SRS -
Disposal Procedures
DEPLOYED AIR BAG MODULE OR OPERATED
SEAT
PROCEDURES
Discard the deployed air bag module or the operated seat
belt with pre-tensioner paying attention to the following items.
1. The deployment makes the inflator of the air bag or the
2. Do not apply any water or oil onto the deployed air bag
3. Wear gloves and protective glasses before handing the
4. Discard the air bag module and the seat belt with
Air bag module,
seat belt with
pre-tensioner
5. Be sure to always wash your hands after completing this
BELT PRE-TENSIONER
operation of the seat belt pre-tensioner very hot. Wait
for more than 30 minutes for cooling before handling
the inflator.
module or the operated seat belt pre-tensioner.
deployed air bag module or the operated seat belt
pre-tensioner since materials on those parts may cause
irritation to eyes or skin.
Caution
If after following these precautions, any material does
get into the eyes or on the skin, immediately rinse the
affected area with a large amount of clean water.
If any irritation develops, seek medical attention.
pre-tensioner after placing them into a strong vinyl bag
for sealing.
operation.
52B-75
DISPOSAL