Steering Shaft - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

37A-14

STEERING SHAFT

REMOVAL AND INSTALLATION
Caution:
Before removing clock spring, refer to GROUP 52B – Service Precautions and Air Bag Module
and Clock Spring.
Pre-removal Operation
Steering Wheel Removal (Refer to P.37A-12.)
D
Instrument Under Cover Removal
D
(Refer to GROUP 52A.)
5
6
8
Removal steps
1. Lower column cover
2. Upper column cover
3. Clock spring and column switch
assembly (Refer to GROUP 52B.)
"AA 4. Bolt
Toe board
STEERING -
Steering Shaft
2
7
12 ± 2 N·m
18 ± 2 N·m
4
5.0 ± 1.0 N·m
INSTALLATION SERVICE POINT
"AA BOLT INSTALLATION
Before installing the bolt, coat the mounting hole on the toe
board with the specified sealant.
Specified sealant: 3M ATD Part No.8513 or equivalent
Post-installation Operation
Instrument Under Cover Installation
D
(Refer to GROUP 52A.)
Steering Wheel Installation (Refer to P.37A-12.)
D
Checking Steering Wheel Position with Wheels
D
Straight Ahead
A
A
3
1
5. Steering column shaft assembly
and Shaft cover
6. Shaft cover
7. Steering column shaft assembly
8. Cover assembly
Section A – A
Column
cover
Tab