Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 587

52B-56
MB990784
Clock spring connector
Steering wheel - driver's air bag
module assembly
SRS - Air Bag Modules and Clock Spring
B
A
MB990803
AC" CLOCK SPRING REMOVAL
Caution
Keep the removed clock spring in a clean and dry place.
AD" COVER REMOVAL
Use the special tool to insert into the notch as shown in
the illustration and remove the cover.
AE" STEERING WHEEL - DRIVER'S AIR BAG MODULE
1. By sliding the A section (in the figure) of the clock spring
A
2. Insert the hexagonal bit socket into the arrow section
Hexagonal bit
socket
STEERING WHEEL REMOVAL
"
ASSEMBLY REMOVAL
connector in the arrow direction, disconnect the connector.
in the figure. Completely loosen the bolt, and then remove
the steering wheel - driver's air bag module assembly.
NOTE
Use a hexagonal bit socket or a hexagonal wrench having
an effective length of 75 mm or more in the hexagonal
section and the diameter of 8 mm or more.