DISASSEMBLY AND REASSEMBLY
Disassembly steps
AA" "AA 1. Special bolt
"AA 2. Steering lock bracket
"AA 3. Steering lock cylinder assembly
4. Snap ring
Left-hand tap
Special bolt
Steering lock
bracket
Steering lock body
STEERING -
1
6
7
DISASSEMBLY SERVICE POINT
AA" SPECIAL BOLT REMOVAL
1. Drill in the special bolt a hole deep enough for the tap
2. Remove the special bolt with a left-hand tap.
REASSEMBLY SERVICE POINT
"AA STEERING LOCK CYLINDER ASSEMBLY/
1. When installing the steering lock cylinder assembly and
2. Check that the steering lock works properly. Then, tighten
Steering Shaft
2
4
3
5. Steering shaft assembly
6. Tilt spring
7. Steering column assembly
to stand.
STEERING LOCK BRACKET/SPECIAL BOLT
INSTALLATION
steering lock bracket to the steering column assembly,
temporarily install the steering lock in alignment with the
column boss.
the special bolts until the heads twists off.
5
37A-15