Timing Belt And Timing Belt B - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

11A-34

TIMING BELT AND TIMING BELT B

REMOVAL AND INSTALLATION
Caution
If the vehicle is equipped with the Brembo disc brake, during maintenance, take care not to contact
the parts or tools to the caliper because the paint of caliper will be scratched.
Pre-removal and Post-installation Operation
Under Cover Removal and Installation (Refer to GROUP 51 - Front Bumper.)
D
Side Cover Removal and Installation
D
Drive Belt Tension Check (Refer to P.11A-7.) <After installation only>
D
Crankshaft Pulley Removal and Installation (Refer to P.11A-15.)
D
Crossmember Bar Removal and Installation (Refer to GROUP 32 - Engine Roll Stopper, Centermember.)
D
Front Exhaust Pipe Removal and Installation (Refer to GROUP 15.)
D
Engine Mounting Removal and Installation (Refer to GROUP 32.)
D
11 ± 1 N·m
2
8.8 ± 1.0 N·m
5
44 ± 10 N·m
24 ± 4 N·m
11 ± 1 N·m
Removal steps
1. Timing belt front upper cover
2. Water pump pulley
3. Timing belt front center cover
4. Idler pulley
5. Drive belt auto-tensioner
6. Timing belt front lower cover
ENGINE -
Timing Belt and Timing Belt B
48 ± 5 N·m
1
3
11 ± 1 N·m
64 ± 5 N·m
6
9.0 ± 1.0 N·m
21 ± 4 N·m
9
8
10
11
35 ± 6 N·m
7
4
"GA D Timing belt tension adjustment
7. Timing belt
AA" "FA
"EA 8. Tensioner pulley
9. Tensioner arm
"DA 10. Auto-tensioner
11. Idler pulley
23 ± 3 N·m