Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 963

22A-56
MANUAL TRANSMISSION -
SENSOR, SWITCH AND RELAY <VEHICLES WITH ACD OR
VEHICLES WITH ACD AND AYC>
REMOVAL AND INSTALLATION
Caution
Before removing the steering wheel and air bag module assembly, be sure to refer to GROUP
52B Precautions in Servicing and Airbag Module Clock Spring.
1
Parking brake lever
3
Steering wheel sensor removal
steps
D Steering wheel and column cover
(Refer to GROUP 37A.)
1. Steering wheel sensor
G sensor removal steps
D Floor console (Refer to GROUP 52A.)
2. Longitudinal G sensor
3. Lateral G sensor
Steering wheel sensor
2
REMOVAL SERVICE POINT
AA" STEERING WHEEL SENSOR REMOVAL
Remove the steering wheel sensor from the column switch.
Caution
Make sure no oil adheres to the steering wheel sensor
because a photocoupler is used.
Sensor, Switch and Relay <Vehicles with ACD
or vehicles with ACD and AYC>
Electric pump relay removal
4. Electric pump relay
ACD mode switch removal steps
D Instrument panel ornament (Refer to
GROUP 52A – Instrument Panel.)
5. ACD mode switch
NOTE
For details on the wheel speed sensor, refer to GROUP
35B.
4
5