Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 667

42-34
1 2 3
4
5
BODY - BODY -
"BA OPERATION CHECK <Vehicles with power
1. Install the glass to the window regulator assembly.
2. Press the power window switch to fully-open the glass,
INSPECTION
POWER WINDOW RELAY CONTINUITY CHECK
Battery voltage
Power window
relay
Not applied
Applied
Doors Doors
window>
Caution
(1) As fully open position which is programed in the
power window-ECU is released (initialized), the
window regulator assembly should not be
operated until it is installed to the glass.
(2) The clamping prevention function does not
operate the first time that the glass is fully closed.
and then return the glass toward the fully-close position
about 30 mm each. In the fully-close position, keep on
pressing the power window switch for 0.5 second or more.
NOTE
This operation will program the power window-ECU.
y g Terminal No.
1 3 4 5