Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 986

MANUAL TRANSMISSION OVERHAUL -
Control shaft
Select
lever
shoe
"GA CONTROL HOUSING INSTALLATION
Apply sealant at the positions of the transmission case shown
in the illustration.
Sealant
Specified sealant:
MITSUBISHI genuine sealant Part No.MD997740 or
equivalent
Caution
Evenly squeeze out the agent so that it is not insufficient
or excessive.
"HA SPEEDOMETER GEAR INSTALLATION
Apply transmission oil on the O-ring for the speedometer
gear.
Transmission oil
Specified oil:
MITSUBISHI genuine "DIA-QUEEN" multi gear oil
<75W/85W> or equivalent
"IA SELECT LEVER INSTALLATION
Apply grease on the sliding section of the select lever shoe's
control shaft.
Grease
Specified grease:
MITSUBISHI genuine grease Part No.0101011 or
equivalent
"JA O-RING INSTALLATION
Apply transmission oil on the O-ring.
Transmission oil
Specified oil:
MITSUBISHI genuine "DIA-QUEEN" multi gear oil
<75W/85W> or equivalent
INSPECTION
BACKUP LIGHT SWITCH
Check the continuity between the terminals.
Items
Switch pressed
Switch released
Transmission
Continuity
Continuity not established
Continuity established
22B-21