Mitsubishi Electric MR-E A Series Instruction Manual page 119

6. DISPLAY AND OPERATION
Name
Within one-revolution
position high
Load inertia moment
ratio
Bus voltage
www.DataSheet4U.com
6.2.3 Changing the status display screen
The status display item of the servo amplifier display shown at power-on can be changed by changing the
parameter No. 18 settings.
The item displayed in the initial status changes with the control mode as follows:
Symbol Unit
Cy2 100 The within one-revolution position is displayed in 100 pulse
pulse increments of the encoder.
The value returns to 0 when it exceeds the maximum number of
pulses.
The value is incremented in the CCW direction of rotation.
dC 0.1 The estimated ratio of the load inertia moment to the servo motor
Times shaft inertia moment is displayed.
Pn V The voltage (across P-N) of the main circuit converter is displayed.
Control mode
Position
Position/
Cumulative feedback pulses/servo motor speed
internal speed
Internal speed
Description
Status display at power-on
Cumulative feedback pulses
Servo motor speed
6 - 4
Display
range
0
to
1310
0.0
to
300.0
0
to
450