Indoor Unit; Outdoor Unit - Huawei NetCol5000-A050 Quick Manual

In-row air cooled smart cooling product
Hide thumbs Also See for NetCol5000-A050:
Table of Contents

Advertisement

The information in this document is subject to change due to version upgrade or other
reasons. Every effort has been made in the preparation of this document to ensure accuracy
of the contents, but all statements, information, and recommendations in this document do
not constitute a warranty of any kind, express or implied.
Only qualified or trained technical personnel are allowed to perform operations on the
device. Operation personnel should understand the composition and working principles of
the smart cooling system and local regulations.
Before installing the device, read the user manual carefully to get familiar with product
information and safety precautions. Huawei shall not be liable for any consequence caused
by violation of the storage, installation, and operation regulations specified in this document
and the user manual.
Use insulated tools when installing the device. For personal safety, wear proper personal
protective equipment (PPE).
1
Overview

Indoor Unit

(1) Electric heater (optional)
(2) Fan switch
(3) Fan
(4) Display module
(5) Electrical box
(6) Evaporator
(7) Signal cable terminal block
(8) Main control module
(9) Power module
(10) Temperature and humidity
(T/H) sensor
(11) Compressor drive
(12) Oil separator
(13) Compressor
(14) Filter dryer
(15) Wet film humidifier
(optional)
(16) Condensate pump

Outdoor Unit

NetCol500-A060
(1) Condenser
NetCol500-A120
(can connect to two
indoor units)
(2) Electric control box
1
Low Temperature
Component (Optional)
(3) Fan
Copyright © Huawei Technologies Co., Ltd. 2021.
All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents