Connecting Cabinet Input Power Cables; Connecting Rpdu Power Cables - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)

4.3.2.2 Connecting Cabinet Input Power Cables

Context
The power distribution subrack position in the cable connection figure is for
reference only. The actual position may vary.
Procedure
Step 1 (Optional) Connect input power cables to the PDU.
1.
2.
Figure 4-57 Connecting input power cables to the PDU
----End

4.3.2.3 Connecting rPDU Power Cables

Context
The rPDU complying with China standards or IEC can be configured based on site
requirements.
If the rPDU is not configured with industrial connectors, connect the rPDU cables.
Procedure
Step 1 Connect cabinet rPDU cables.
1.
2.
3.
Issue 02 (2021-06-30)
(Optional) Remove the transparent protective panel at the rear of the PDU.
Connect input power cables to the PDU.
Connect the rPDU enclosure ground cable.
Remove the front panel from the rPDU.
Connect one end of the reserved rPDU power cable to the rPDU terminal
block, and the other end to the power distribution subrack.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
94