Setting Parameters - Huawei Telepresence TP3106 Installation Manual

HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
Checking the Devices
Before installing the telepresence system, you must check the devices and mechanical parts to
ensure that they meet the requirements described in
l If items included differ from those listed in the table, contact the local Huawei representative
l If any connector is damaged or loosened, or any cable is scratched, repair or replace the cable.
Table 4-4 Item checklist for the equipment
Category
Telepresence
devices
Mechanical
part
Interior cable

4.3 Setting Parameters

Before commissioning the telepresence system, set the IP addresses of each device.
lists the recommended IP address for each device.
Issue 07 (2013-11-08)
NOTICE
office.
Item
Appearance
Interior
Interior cable
Silkscreen
Connector
Appearance
Quantity
Appearance
Connector
NOTE
The interior cables have been installed before delivery. Only exterior cables need to be installed onsite.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table
Requirements
The appearance is tidy without scratches, loose mechanical
parts, or damage.
No foreign objects or water stains exist.
The cables are bound up in order. No cables are
disconnected or damaged.
The silkscreen is clear and identifiable.
The connectors are in good condition with straight contact
pins.
The appearance is tidy without scratches, loose mechanical
parts, or damage.
The quantity is consistent with that in the shipping list.
The cables are tidy, and none are missing.
The connectors are secure. All connectors are plugged in
correctly.
4 Installation Preparation
4-4.
Table 4-5
20