Web-Based Remote Management; Enabling Web-Based Login - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
11
About This Chapter
Your TE30 supports remote management using the web interface. From the web interface, you
can set parameters, view the settings, and control the TE30.
The major features of operating the TE30 using the web interface are as follows:








11.1 Enabling Web-based Login

After web-based login is enabled, you can log in to the TE30 using its web interface.
11.2 Configuring the Web Browser
Before using the web interface for TE30 remote management, configure the web browser on
your computer.
11.3 Logging In to the Endpoint Web Interface
Before using the web interface for TE30 remote management, log in to its web interface.
11.1 Enabling Web-based Login
After web-based login is enabled, you can log in to the TE30 using its web interface.
Issue 01 (2013-03-27)

Web-based Remote Management

A computer is used to access the IP network where the TE30 is located.
When you log in to the TE30 web interface, the TE30 web pages are displayed.
A maximum of three users can log in to the TE30 web interface simultaneously. The
administrator can configure the system, while common or API users can set only
personal settings.
The user who uses the remote control to operate the endpoint has a higher level of rights
than the user who logs in to the endpoint using the web interface. The former can grant
the control right to or revoke the control right of the latter.
You can import and export an address book or configuration file on the web interface.
You can import license files on the web interface.
With regard to inputting information in quantity, such as adding sites to the address book,
using the web interface is more convenient than using the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Web-based Remote Management
83