Huawei USG6000E Series Hardware Manual page 598

HUAWEI USG6000E Series
Hardware Guide
2.
Figure 6-7 Removing a device from the cabinet
Step 6 Install the new USG device, connect the cables according to the labels, and then
power on the USG device. For details, see
----End
Follow-up Procedure
After replacing the device, pack up all the tools. If the old USG device is faulty, fill
in the
Transmission Sheet to the equipment supplier or the specified repair service
provider.
Issue 08 (2022-04-20)
Hold the USG device with both hands and pull it out along the guide rails of
the rear mounting ears. Place the removed USG device in an ESD bag or on
an ESD pad.
Repair Transmission Sheet
Copyright © Huawei Technologies Co., Ltd.
Hardware Installation.
and send the faulty device with the Repair
6 Maintaining the Hardware
591