Huawei USG6000E Series Hardware Manual page 254

HUAWEI USG6000E Series
Hardware Guide
Name
Indicator and button
area
HDD/SSD slot
Fixed interface area
Protective ground
terminal
MAC label
SN label
Fan module
Power module
Indicators and Buttons
Figure 4-103 Indicators and buttons on the USG6630E
Issue 08 (2022-04-20)
Description
Provides multiple indicators to display the running
status of the device in real time and provides the RST
button for emergency maintenance.
Houses hard disks for storing log and report data.
Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.
Connects the M4 OT terminal of a PGND cable to the
cabinet or the ground bar in the equipment room.
Uniquely identifies the MAC address of the device,
which is required during network forwarding
configuration.
Uniquely identifies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
The fan module provides air flow for heat dissipation.
The power module supports hot-swapping and can be
replaced without interrupting device operation.
However, to prevent overheating, do not operate the
device without a functioning fan module for more than
one minute.
Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
247