Huawei USG6000E Series Hardware Manual page 130

HUAWEI USG6000E Series
Hardware Guide
Table 4-53 Ports on the USG6565E
Port
Combo ports (0 to
7)
Issue 08 (2022-04-20)
Connector Type
RJ45 + SFP
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Description
Combo ports.
Combo ports are
logic ports. One
combo port can
work as a GE
electrical interface
or a GE optical
port. Each combo
port has only one
internal
forwarding port.
When the
electrical port is
enabled, the
optical port is
disabled. When
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7. By default,
the combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.
Available
Components
● Ethernet
Cable
● 100Mbps SFP
Optical
Modules
● 1Gbps eSFP
Optical
Modules
NOTE
In
V600R007C20SPC5
00 and later
versions, Combo
ports support
100Mbps SFP
Optical Modules.
123