Huawei USG6000E Series Hardware Manual page 440

HUAWEI USG6000E Series
Hardware Guide
Item
Port type
Maximum power consumption [W]
Maximum heat dissipation [BTU/hour]
4.5 Optical/Electrical Modules
This chapter describes hardware information for optical/electrical modules of the
USG6000E.
4.5.1 Before You Start
Before using the optical module, please understand the risk of using the non-
certified optical module and how to How to Identify Huawei-Certified optical
modules.
● A USG must use optical modules that have been certified for use. Non-certified
● The methods provided here are only for reference. To confirm whether optical
Risks of Using Non-Huawei-Certified Optical Modules
During certification of optical modules for USG, Huawei completes comprehensive
functionality verification to ensure quality of optical modules. The verified items
include optical module plug/unplug, transmit optical power, receive optical power,
signal transmission quality, data reading, error tolerance, compatibility,
electromagnetic compatibility (EMC), and environmental parameters.
Non-Huawei-certified optical modules may cause the following problems:
●
●
Issue 08 (2022-04-20)
NO TICE
optical modules cannot ensure transmission reliability and may affect service
stability. Huawei is not liable for any problem caused by the use of non-
certified optical modules and will not fix such problems.
modules you are using have been certified for use on Huawei USGs, contact
Huawei technical support.
Non-standard structure and size cause failures to install optical modules on
adjacent optical interfaces.
Structures or sizes of some non-Huawei-certified optical modules do not
comply with the Multi-Source Agreement (MSA). When such an optical
module is installed on an optical interface, the size of this optical module
hinders optical module installation on adjacent optical interfaces.
Data bus defects cause suspension of a USG's data bus.
Some non-Huawei-certified optical modules have defects in data bus designs.
Using such an optical module on a USG causes suspension of the connected
data bus on the USG. As a result, data on the suspended bus cannot be read.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Specification
SATA
5.23 W
17.85 BTU/hour
433