Table of Contents
Advertisement
HUAWEI USG6000E Series
Hardware Guide
Table 4-307 Technical specifications of the console cable
Item
Connector 1
Connector 2
Cable
Wire
4.6.5 Ethernet Cable
4.6.5.1 Ethernet Cable
Connection
The Ethernet cable, also called the network cable, is used for carrying signals on
Gigabit networks or networks with a lower packet rate.
Ethernet cables are classified into straight-through and crossover cables according
to the wiring scheme used at the two ends of the cables. The interfaces of the
USG can dynamically adapt to straight-through cables and crossover cables.
Figure 4-190
through cables and crossover cables. You need to strictly observe the wiring
scheme to ensure the quality of services.
●
Issue 08 (2022-04-20)
Description
DB9 connector - D model - 9PIN - female
RJ45 Network Interface Connector, Crystal Connector, 8PIN,
8BIT, Shielded, Plug
Single Cable, Console Serial Port Cable, 3 m, D9F,
CC4P0.48B(S), MP8-VI
8
NO TICE
and
Figure 4-191
Straight-through cable
The straight-through cable is also called the standard cable. Both ends of the
cable use wiring scheme EIA/TIA T568A or EIA/TIA T568B. You are advised to
use wiring scheme EIA/TIA T568B when you make straight-through cables.
Figure 4-190
shows the detail.
Copyright © Huawei Technologies Co., Ltd.
show how to distinguish and make straight-
4 Hardware Overview
491
Hide quick links:
Advertisement
Table of Contents
