Huawei USG6000E Series Hardware Manual page 192

HUAWEI USG6000E Series
Hardware Guide
Port
Issue 08 (2022-04-20)
Connector Type
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Description
2, they can form
an electrical
bypass link.By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.
NOTE
A bypass link can
be established only
when
GigabitEthernet0/0
/20 to
GigabitEthernet0/0
/23 work as
electrical ports.
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.
Available
Components
185