Usg6650E - Huawei USG6000E Series Hardware Manual

HUAWEI USG6000E Series
Hardware Guide
Item
Heat dissipation mode
Airflow direction
Maximum number of 40GE ports
Maximum number of 10GE ports
Maximum number of electrical ports
Redundant power supply
Redundant fans
Noise at normal temperature (acoustic
power) [db(A)]
Long-term operating temperature
[°C(°F)]
Storage temperature [°C(°F)]
Long-term operating relative humidity
[RH]
Storage relative humidity [RH]
Long-term operating altitude [m(ft.)]
Storage altitude [m(ft.)]

4.1.20 USG6650E

Issue 08 (2022-04-20)
NO TE
● The width does not include the size of mounting ears.
● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Specification
The fan module locates at the air
exhaust of the system.
Air inlet from front and air outlet from
rear
2
12
16
1+1
3+1
● USG6635E-AC (02352RQD): -
● USG6635E-DC (02352RQE): ≤72dbA
Without hard disk driver: 0°C to 45°C
With hard disk driver: 5°C to 40°C
-40°C to 70°C
5% RH to 95% RH, non-condensing
5% RH to 95% RH, non-condensing
Without hard disk driver: 0 m to 5000
m
With hard disk driver: 0 m to 3000 m
0 m to 5000 m
276