Huawei USG6000E Series Hardware Manual page 516

HUAWEI USG6000E Series
Hardware Guide
Information marked NOTICE, CAUTION, WARNING, and DANGER in the
operation manual is not exhaustive, but supplements safety precautions.
Local Laws and Regulations
Comply with local laws and regulations while performing operations on the
device. All safety precautions in the operation manual only supplement local
safety regulations.
Basic Installation Requirements
Requirements for Huawei installation and maintenance personnel before they can
perform related operations are as follows:
●
●
●
●
Personal Safety Warnings
●
●
●
●
●
Device Security Precautions
●
●
●
●
5.2.2 Installation Environment Check
Before you install a USG, verify that the installation environment meets
requirements to ensure the normal running and extended life time of the USG.
Table 5-1
Issue 08 (2022-04-20)
Only qualified and trained engineers can install, operate, and maintain
Huawei equipment.
Only qualified professionals can remove safety facilities and troubleshoot
Huawei equipment.
Only authorized or certified personnel can replace Huawei components
(including software).
Installation and maintenance personnel must report all faults and errors that
may cause safety issues to the person in charge.
Do not operate or cable the device during electrical storms.
To avoid electric shock, do not connect the safety extra-low voltage (SELV)
terminal to the telephone-network voltage (TNV) terminal.
To avoid possible eye damage, do not look into the optical cable outlet
without eye protection.
Wear an antistatic suit, ESD gloves, and ESD wrist strap and remove any
jewelry and watches before entering the equipment room to avoid possible
electrical shock or injury.
In the event of fire, evacuate the equipment room and nearby areas and pull
the fire alarm or call your local emergency number.
Fix the device on the ground or other secure places, such as against the wall
or on the mounting shelf.
Do not block the air vent when the device is running.
Tighten the screws with proper tools when installing the panels.
Remove all plastic packing materials from the equipment room after the
installation is complete.
lists installation environment check items.
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Installation
509