Huawei USG6000E Series Hardware Manual page 589

HUAWEI USG6000E Series
Hardware Guide
Replacing the Hard Disk (USG6575E-B, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E,
USG6680E, USG6712E, USG6716E)
If a hard disk is faulty (for example, a hard disk failure log is generated on the
USG), you can replace the hard disk. The hard disk can be replaced no matter
when the USG is powered on or off. If the USG is powered off, skip
not run the disk offline command or press the OFL button. The following
procedure guides you through hard disk replacement while the USG is powered
on:
Step 1 Ensure that all configurations are saved.
Step 2 Run the disk offline command in the system view. Wait about 30 seconds until
the system indicates that the hard disk stops working and then remove the hard
disk to be replaced. Press and hold the OFL button for about four seconds until
the OFL indicator is on. Then remove the hard disk unit to be replaced.
1.
2.
3.
Issue 08 (2022-04-20)
NO TE
If you remove and insert a hard disk without running the disk offline command or press
the OFL button first, the hard disk may be damaged, data in the hard disk may be lost, or
the system may stop responding to services.
Press the button on the right of the hard disk tray to eject the handler.
Use the handler to pull the hard disk out of the slot.
Put the replaced hard disk into an ESD bag.
Copyright © Huawei Technologies Co., Ltd.
6 Maintaining the Hardware
Step 1 and do
582